0611-06
USED INGERSOLL-RAND SCREW COMPRESSOR
Model: SSR-UP6-30-150; SN:PX2529U03330; Year: 2003.
220/440v; 3ph; 60hz; 30hp.


30 HP Rotary screw compressor with Digitalv Control. 112 CFM @ 90 PSI. Max psi: 150. Full sound enclosure keeps noise levels low.  The control system allows for self-monitoring to prevent damage to equipment. Multiple monitoring and operational settings are easily accessible from the Digital Control panel. There are 3 different modes of operation to suit different plant requirements and to allow the most economical method of operation.
Standard features include: Instrument panel, air-to-air 2-stage after-cooler, electronic stepper motor inlet air control, sealed SSR direct drive gear train, and total positive lubrication system with spin-on filter.

THIS MACHINE IS REMOVED FROM SERVICE AND PACKED FOR TRANSPORT.
Very low hours.
$11,500.00

Replacement cost: $20,500.00, (approx.).
FOB: Connecticut.
This machine is offered “in good running condition as taken from service” and is subject to prior sale.
Specifications are approximate and to the best of our knowledge. Verification is available upon request.

USED COMPRESSORS-GENERATORS
USED MACHINERY
Woodworking Application:
SOLD
1001-1
Rogers Screw 15HP Compressor (Used)
Model: MG15-125; SN: xx; Year: 2004.
230v; 3ph; 60hz.

15HP 125PSI rotary screw Compressor.
Hours 5938.

$7,250.00.


Replacement cost: $14,500.00, (approx.).
FOB: Oregon.
This machine is offered “in good running condition as taken from service” and is subject to prior sale.
Specifications are approximate and to the best of our knowledge. Verification is available upon request.
SOLD
1107-05
Intersoll Rand XL 30 HP
Model: XL30HP; SN:N/A xx; Year: N/A.
575v; 3ph; 60cy.

30 HP TEFC Motor, totally self-contained, single stage rotary screw air-enD.

  Equipped with: Inlet air filtration, mounted to horizontal 120-gal. accumulation tank; pressured coolant system with stepper motor inlet, motor starting control system, instrumentation, after-cooler, air dryer, moisture separator and drain trap, hour meter - (20,726) Total operating hours.

$8,500.00.


Replacement cost: $14,500.00, (approx.).
FOB: Hudson, NY
This machine is offered “in good running condition as taken from service” and is subject to prior sale.
Specifications are approximate and to the best of our knowledge. Verification is available upon request.
1110-05
PORTER CABLE COMPRESSOR (Used)
Model: CPLMC7580V2C; SN:D27040; Year: 2006.
240v; Single Phase; 60cy.

Heavy-duty 80-gallon ASME constructed tank houses a 7.5 horsepower, 240-volt induction motor with manual thermal overload protection, which requires a magnetic starter that is included;
Oil-lubricated pump equipped with stainless steel valves;
cast-iron cylinder;
175 pounds per square inch (psi);
  (scfm) ratings: 25.0 at 100 psi and 23.5 @ 175.
Complete with ASME certified safety valve, globe valve, and tank gauge.

   * 7.5 Running
   * 175 PSI - 195 gallon equivalent tank size as compared to conventional 125 PSI models
   * 86 Dba
   * Two-stage, oil lubricated pump designed with stainless steel valves, cast iron cylinder body and sleeves for long and dependable service life
   * Aluminum crankcase and head for cooler operating temperatures
   * Pump contains automotive style piston, rings, and connecting rod
   * 240 Volt capacitor start induction motor with manual thermal overload protection
   * Contactor box mounted and wired to isolate motor starting current, to protect pressure switch
   * Large tank pressure gauge for easy visibility and better accuracy
   * 80 gallon air tank supports heavy duty, continuous multi-tool usage
   * Wire metal belt guard
   * Standard Equipment: Compressor, ASME safety valve, globe valve, tank gauge, oil, and operating manual.
Very Low Usage.

$1,650.00.

Replacement cost: $3,500.00, (approx.).
FOB: Hudson, NY
This machine is offered “in good running condition as taken from service” and is subject to prior sale.
Specifications are approximate and to the best of our knowledge. Verification is available upon request.
1110-10
INGERSOL-RAND SCREW COMPRESSOR (Used)
Model: UP6-10-125; SN: UP9619U07239; Year 2007.
220/440v; 3ph; 60hz.
# Model: UP6-10-150
# Horsepower: 10.0
# CFM Capacity: 34
# PSI: 150
# DBA: 68
# 80 Gallon Tank Dimensions: 53.6" L x 28.9" W x 60.7" H
# 80 Gallon Tank Weight: 925 lbs


$4,500.00.



Replacement Cost: $8,500.00, (approx.).
FOB: Hudson, NY
This machine is offered “in good running condition as taken from service” and is subject to prior sale.
Specifications are approximate and to the best of our knowledge. Verification is available upon request.