USED EDGEBANDERS BRANDT & HOMAG

USED MACHINERY

Browse By Application:

Borers Clamps CNC Routers Combination Machines Compressors & Vacuum Pumps Door & Window Equipment Dowel Equipment Dovetail Dust Edgebanders Feeders Fingerjointers Finishing Gluing Grinders Jointers Kilns Laminating Lathes Material Handling Moulders Planers Postformers Presses Sanders Sawmills & Equipment Saw - Sliders & Vertical Saw - Beam Saw - SLR & RIP Saw - (Other) Shapers - Shape & Sand Stair Equipment Tenoners V - Groover Veneer Equipment Waste

<-Back to Edgebanders

1002-15

BRANDT KDF 660 2C  W/ PREMILL & CORNER ROUNDING

Model: 660 Profiline 2C Servo; SN: 0-261-02-xxxx; Year 2007.

220/440v; 3ph; 60hz.

Edge band thickness 0.4 – 12 mm (0.016" - 1/2” )

Coil cutoff maximum 0.8 x 60 mm; 3.0 x 45 mm (PVC)

Edgeband height 12 - 65 mm (1/2" – 2 9/16 ")

Panel length min. 160 mm (6 3/8")

Panel width min. 65 mm (2 3/8")

Panel thickness - min. 8 mm (5/16") - max. 60 mm (2 3/8")

Feed speed – two speeds 16 m/min (52 FPM) and 11 m/min

( 36 FPM ) when using the contour trimming unit.

PC-20 Program Control; PC: Industrial PC, 600 Mhz, Front side USB port.

- Memory: 256 Mb ram, 1 Gb Flash Card.; Screen: 12.1” Color;

- Internal modem for remote diagnostic link.

Motorized top pressure beam for panel thickness adjustment.

Smooth upper pressure rollers.

Automatic feed track lubrication system.

Premill unit for pre-trimming the work piece edge prior to processing.

Pre-melt granulate glue application system; Quick-change glue tank.

Infrared radiant pre-heating;

Program controlled positioning of the pressure zone. First pressure roller driven and three idle pressure rollers.

Double motor end trimming unit.

Program controlled indexing from straight to bevel end trimming.

Flush trimming unit with two position vertical indexing and program controlled pneumatic indexing of the unit. Diamond cutters.

Fine trimming unit with DFC cutter head technology, servo motor control for side copy positioning and to edge thickness for the unit. Auto tilt. Radius / straight DFC cutters included. This unit provides superior dust flow control of the trimmed chips and provides precise trimming due to location of the vertical copy rollers. Diamond cutters with 2mm radius.

Nested package three roller copy-wheele system.

Double Corner-Rounding trimming unit for profile corner trimming.

Scraping unit for rigid PVC edges. Top copy shoe for nested parts. Program controlled indexing.

Second knife station: Surface scraping unit.

Top and Bottom Buffing Unit.

$77,500.00.

Replacement cost: $146,000.00 (approx)

FOB:  Texas.

This machine is offered “in good running condition as taken from service” and is subject to prior sale.

Specifications are approximate and to the best of our knowledge. Verification is available upon request.