USED EDGEBANDERS BRANDT & HOMAG
 | ||||
1010-9
BRANDT BANDER CORNER-ROUNDING (Used)
Model: KDN 530-C; SN: 0-261-xxxx; Year: 2003
230/460v; 3ph; 60hz.
Very low hours. Records available.
This is a Servo-Motor controlled machine.
0.4 - 8 mm (5/16") Edge cap., panel thickness 8 mm - 50 mm (5/16" - 2"); minimum panel length 160 mm (6-3/8") and 65 mm (2-1/2") minimum width; line control (NO limit switches) for workstation function.
Height adjustment with top pressure beam for all workstations, equipped with digital height indicator.
"PC" Program Control with: 7-1/2" VGA Screen, 8 MB IDE flash disk, 8 MB RAM, internal Modem for remote diagnostic link; signal infeed light to insure proper spacing between panels.
Equipped with: Quick heat-up glue system,(approx. 12 Min) w/glue tank for maintenance & glue color change; glue temperature indicator for both the glue pot & glue roller with LED thermostat, automatic temperature setback if the machine is idle for (15) Min or more.
The glue applicator roller is reversible & retractable from the fence line.
Automatic magazine for strip & coil (large 800 mm dia. coil table to accommodate large coils of 3 mm PVC) stock, 3 mm PVC guillotine, (1) drive plus (2) idle rollers "pneumatically controlled" pressure section.
Workstations: End trim (0.25 HP - 12,000 RPM motors), chamfers 0° - 15°.
Top & bottom flush/radius tri, bevels 0° - 15° (0.5 HP - 12,000 RPM motor), with insert knives for 3 mm PVC radius.
Top & bottom scraping for 3 mm radius, pneumatically controlled indexing system.
Contour trimming station (0.5 HP motor) for corner rounding "on the fly".
Last station: Top & bottom buffing (0.25 HP - 2,800 motors).
Trim stations have HF motors w/electronic brakes; feed chain track speed 11 m/min (36 FPM), 3 HP feed drive.
Complete with: Operator control panel w/PLC (Programmable Logic Control) keypad & LED readouts and used tooling.
$39,500.00.
Replacement cost: $80,000.00 (approx)
FOB: MO.
This machine is offered “in good running condition as taken from service” and is subject to prior sale.
Specifications are approximate and to the best of our knowledge. Verification is available upon request.
USED MACHINERY
Browse By Application:
