USED SANDERS
0803-25
Bütfering 53” Planer Sander (Used)
Model: SCO 213 ML; SN: xx; Year: 2004.
230/460v 3ph; 60hz; 150/75amps.. 

First Head: For heavy stock removal, calibrating sanding and basic veneer sanding.
Working width of 53”; Constant Pass Line Height.
Spiral planing cutter head with four sided insert knives and alternating spiral design.
Segmented anti-kickback in feed section.
Second Head is a Combination with an 85 shore profiled rubber contact drum and air cushion pad with timing system for veneer sanding.
Two abrasive belt speeds on sanding head – 30 / 60 fps.
Grit size compensation system;
Automatic positioning of cutter-block and contact roller.
Automatic conveyor belt tracking; Electronic belt oscillation system;
Electronic motor braking system; Over thickness protection system;
Variable feed speed of conveyor 8 – 43 FPM.
Conveyor belt of special harder material.
Safety interlocks on all access doors.
In feed roller extension.
Emergency stops at infeed and out-feed locations.
Technical Specifications:
Working width 1350 mm  ( 53” );
Abrasive Belt width/ length1370 mm ( 54” )/2150 mm ( 85” );
Workpiece thickness min./max3 mm ( 1/8” )/ 150 mm ( 6” );
Feed via 2.2 kw (3 HP) motor: Variable 2.5 – 13 m/min.(8 -43FPM);
Planer:34 HP/5,000  RPM; Combination - Head:30 HP @ 30 / 60 FPS
Dust collection: 3800 CFM; Compressed air: 90 PSI
Machine net weight4200 kg  ( 9,240 lbs )
This is a single voltage machine. Transformers are available if required.

$32,500.00.


Replacement cost: $90,000.00 (approx.).
FOB: Brooklyn,NY
This machine is offered “in good running condition as taken from service” and is subject to prior sale.
Specifications are approximate and to the best of our knowledge. Verification is available upon request.
USED MACHINERY
Woodworking Application:
Stone Work Application:
SSOLD