0808-4
JOSTING VENEER GUILLOTINE
(Used)
Model: ZFS 2800; SN: 10428; Year: 1993.
220/440v; 3ph; 60hz.

Veneer Guillotine for the quick, exact and parallel veneer book cut.
Cutting length 131”/2800 mm capacity; insert height 80 mm;
cutting area 20-470 mm with safety electro-control,
tilting protecting grids,
positioning control, quick table drive,
swivelling and drawing cut, simultaneous cut of
top and bottom knife, reject operation of
low-noise drives, precision hydraulics with
2 pressure steps and soft-switching valves.
Top knife brake motor gearing crank drive
Bottom knife – hydraulic 9 ½ KW, min 6 bar compressed air required.

$42,500.00.

Replacement cost: $167,800.00, (approx.).
FOB: NYC.
This machine is offered “in good running condition as taken from service” and is subject to prior sale.
Specifications are approximate and to the best of our knowledge. Verification is available upon request.


0808-05
CASATI VENEER STICHER
(Used)
Model: Z1000; SN: 105010; Year 2001.
230v; 3ph; 60hz.

 
Joins decorative and constructional veneers; stitches veneers from 0.015" (0.4 mm) - 0.079" (2 mm) thickness, 39-3/8" throat clearance, variable feed speed 32 - 82 FPM; table size 18" x 44".

Includes: Thermo-adhesive thread applied in zigzag fashion via heated guide, thermostat temperature regulation, zigzag pitch and height adjustment, automatic thread cutting, and controls mounted in overhead arm.

$7,250.00.

Replacement cost: $16,800.00, (approx.).
FOB: NYC.
This machine is offered “in good running condition as taken from service” and is subject to prior sale.
Specifications are approximate and to the best of our knowledge. Verification is available upon request.
Machine moved to warehouse
0809-03
KUPER VENEER STITCHER (Used)
Model: FW 1200; SN: xx; Year 1984.
220; 3ph; 60hz.
 
Stitches veneers from 0.3 - 3 mm (0.01" - 0.12") thickness, approx. 47-1/4" throat depth, variable feed speed from 10 - 50 MPM (33 - 164 FPM), 0.75 KW feed motor, table size 63" x 25". High performance hot air heating tube, glue applied in zigzag fashion via heated guide.

$9,900.00.

Replacement cost: $18,800.00, (approx.).
FOB: NYC.
This machine is offered “in good running condition as taken from service” and is subject to prior sale.
Specifications are approximate and to the best of our knowledge. Verification is available upon request.


SOLD.
USED VENEER EQUIPMENT
KUPER VENEER STITCHER
USED MACHINERY
Woodworking Application:
Stone Work Application:
SOLD.