Brandt KDF 520 Year 2008
Edge band thickness 0.4 – 8mm (0.016" - 1/4” )
Coil cutoff maximum 0.8 x 60 mm; 3.0 x 45 mm (PVC)
Edgeband height 12 - 65 mm (1/2" – 2 9/16 ")
Panel length min. 160 mm (6 3/8")
Panel width min. 65 mm (2 3/8")
Panel thickness - min. 8 mm (5/16") - max. 60 mm (2 3/8")
Feed speed – 11 m/min.
Internal modem for remote diagnostic link.
Smooth upper pressure rollers.
Automatic feed track lubrication system.
Pre-Mill Station
First pressure roller driven and three idle pressure rollers.
Double motor end trimming unit.
Program controlled indexing from straight to bevel end trimming.
Fine Trimming Station: Top/bottom (2) motors, 0.35 kW (0.50 HP) 12,000 RPM, bevels 0° - 25°, with combination flush/radius/chamfer cutterheads; horizontal and vertical tracing wheels.
either radius or chamfer cutters can be mounted;
Profile scraping and Buffing
Edge band thickness 0.4 – 8mm (0.016" - 1/4” )
Coil cutoff maximum 0.8 x 60 mm; 3.0 x 45 mm (PVC)
Edgeband height 12 - 65 mm (1/2" – 2 9/16 ")
Panel length min. 160 mm (6 3/8")
Panel width min. 65 mm (2 3/8")
Panel thickness - min. 8 mm (5/16") - max. 60 mm (2 3/8")
Feed speed – 11 m/min.
Internal modem for remote diagnostic link.
Smooth upper pressure rollers.
Automatic feed track lubrication system.
Pre-Mill Station
First pressure roller driven and three idle pressure rollers.
Double motor end trimming unit.
Program controlled indexing from straight to bevel end trimming.
Fine Trimming Station: Top/bottom (2) motors, 0.35 kW (0.50 HP) 12,000 RPM, bevels 0° - 25°, with combination flush/radius/chamfer cutterheads; horizontal and vertical tracing wheels.
either radius or chamfer cutters can be mounted;
Profile scraping and Buffing
Edge band thickness 0.4 – 8mm (0.016" - 1/4” )
Coil cutoff maximum 0.8 x 60 mm; 3.0 x 45 mm (PVC)
Edgeband height 12 - 65 mm (1/2" – 2 9/16 ")
Panel length min. 160 mm (6 3/8")
Panel width min. 65 mm (2 3/8")
Panel thickness - min. 8 mm (5/16") - max. 60 mm (2 3/8")
Feed speed – 11 m/min.
Internal modem for remote diagnostic link.
Smooth upper pressure rollers.
Automatic feed track lubrication system.
Pre-Mill Station
First pressure roller driven and three idle pressure rollers.
Double motor end trimming unit.
Program controlled indexing from straight to bevel end trimming.
Fine Trimming Station: Top/bottom (2) motors, 0.35 kW (0.50 HP) 12,000 RPM, bevels 0° - 25°, with combination flush/radius/chamfer cutterheads; horizontal and vertical tracing wheels.
either radius or chamfer cutters can be mounted;
Profile scraping and Buffing
