Busellato Jet Optima S2 (Used) Model: Jet-S2; SN: 6951; Year: 2008. 400v; 3ph; 50-60hz. Available December 2021. Under power for inspection by Appointment.
BUSELLATO CNC Machine Video.
Basic information:
Technical information:
Number of guided axles: 4
- SOFTWARE: Control program: Genesis Evolution (TPA)
DXF / DWG formats, graphic programming, workpiece displays in 3D, CAD / CAM.
- Cantilever version of the machine. For machining boards up to approx. 2500mm.
- Work table: 6 movable backrests with 18 Pods.
- Working dimensions of the machine:
Length A = 3059mm (stroke = 3540mm)
Width B = 1300mm (stroke = 1700mm)
Height C = 150mm (stroke = 250mm)
- Maximum axle speeds:
X = 60 m / min
Y = 50 m / min
Z = 15 m / min
- External dimensions of the machine:
Length (A) = 5994mm
Width (B) = 4445mm
Height (C) = 2650mm
- Main milling unit
Motor power: 9.2 kW
Max. speed: 24,000 rev / min
Cooling: air-
fourth axis of rotation 0-360 degrees: DA
type chuck: HSK F63 (German standard) 3 pieces included
- Horizontal milling unit: YES
Power: 5,5kW
No. rpm: 18,000 rpm
- Drilling machine:
Number of drills: 18
- vertical: 12
- horizontal: 6
Saw in X direction
- Lifting rails: YES (assistance in loading heavy workpieces. Eg: door leaves) 4 pieces
- Warehouse of tools:
8 position Tool Changer. Placed next to the milling unit. Tool change during the drilling phase.
- Pump flow: 100 m3 / h
Type: Dry pump
Manufacturer: BECKER Germany
- Angular aggregates: YES
1) Angular aggregate with an inclination of 0-90 degrees for holes for hinges and hidden hinges
2) Angular unit with four outputs for drills and cutters (90 degree)
3) Angle unit 90 degree with two outputs: for saw and for cutter
- Lubrication of linear guides: Manual
- Teleservice: Possible with computer connection from the machine to the Internet for remote service connection. Assistance in remote deployment while working on the machine.
- Safety system on the machine: Safety mats. They are divided into 3 parts, which allows alternating work.
The machine is very good condition and available until it is removed from service for a demonstration.
BUSELLATO CNC Machine Video.
Basic information:
Technical information:
Number of guided axles: 4
- SOFTWARE: Control program: Genesis Evolution (TPA)
DXF / DWG formats, graphic programming, workpiece displays in 3D, CAD / CAM.
- Cantilever version of the machine. For machining boards up to approx. 2500mm.
- Work table: 6 movable backrests with 18 Pods.
- Working dimensions of the machine:
Length A = 3059mm (stroke = 3540mm)
Width B = 1300mm (stroke = 1700mm)
Height C = 150mm (stroke = 250mm)
- Maximum axle speeds:
X = 60 m / min
Y = 50 m / min
Z = 15 m / min
- External dimensions of the machine:
Length (A) = 5994mm
Width (B) = 4445mm
Height (C) = 2650mm
- Main milling unit
Motor power: 9.2 kW
Max. speed: 24,000 rev / min
Cooling: air-
fourth axis of rotation 0-360 degrees: DA
type chuck: HSK F63 (German standard) 3 pieces included
- Horizontal milling unit: YES
Power: 5,5kW
No. rpm: 18,000 rpm
- Drilling machine:
Number of drills: 18
- vertical: 12
- horizontal: 6
Saw in X direction
- Lifting rails: YES (assistance in loading heavy workpieces. Eg: door leaves) 4 pieces
- Warehouse of tools:
8 position Tool Changer. Placed next to the milling unit. Tool change during the drilling phase.
- Pump flow: 100 m3 / h
Type: Dry pump
Manufacturer: BECKER Germany
- Angular aggregates: YES
1) Angular aggregate with an inclination of 0-90 degrees for holes for hinges and hidden hinges
2) Angular unit with four outputs for drills and cutters (90 degree)
3) Angle unit 90 degree with two outputs: for saw and for cutter
- Lubrication of linear guides: Manual
- Teleservice: Possible with computer connection from the machine to the Internet for remote service connection. Assistance in remote deployment while working on the machine.
- Safety system on the machine: Safety mats. They are divided into 3 parts, which allows alternating work.
The machine is very good condition and available until it is removed from service for a demonstration.
BUSELLATO CNC Machine Video.
Basic information:
Technical information:
Number of guided axles: 4
- SOFTWARE: Control program: Genesis Evolution (TPA)
DXF / DWG formats, graphic programming, workpiece displays in 3D, CAD / CAM.
- Cantilever version of the machine. For machining boards up to approx. 2500mm.
- Work table: 6 movable backrests with 18 Pods.
- Working dimensions of the machine:
Length A = 3059mm (stroke = 3540mm)
Width B = 1300mm (stroke = 1700mm)
Height C = 150mm (stroke = 250mm)
- Maximum axle speeds:
X = 60 m / min
Y = 50 m / min
Z = 15 m / min
- External dimensions of the machine:
Length (A) = 5994mm
Width (B) = 4445mm
Height (C) = 2650mm
- Main milling unit
Motor power: 9.2 kW
Max. speed: 24,000 rev / min
Cooling: air-
fourth axis of rotation 0-360 degrees: DA
type chuck: HSK F63 (German standard) 3 pieces included
- Horizontal milling unit: YES
Power: 5,5kW
No. rpm: 18,000 rpm
- Drilling machine:
Number of drills: 18
- vertical: 12
- horizontal: 6
Saw in X direction
- Lifting rails: YES (assistance in loading heavy workpieces. Eg: door leaves) 4 pieces
- Warehouse of tools:
8 position Tool Changer. Placed next to the milling unit. Tool change during the drilling phase.
- Pump flow: 100 m3 / h
Type: Dry pump
Manufacturer: BECKER Germany
- Angular aggregates: YES
1) Angular aggregate with an inclination of 0-90 degrees for holes for hinges and hidden hinges
2) Angular unit with four outputs for drills and cutters (90 degree)
3) Angle unit 90 degree with two outputs: for saw and for cutter
- Lubrication of linear guides: Manual
- Teleservice: Possible with computer connection from the machine to the Internet for remote service connection. Assistance in remote deployment while working on the machine.
- Safety system on the machine: Safety mats. They are divided into 3 parts, which allows alternating work.
The machine is very good condition and available until it is removed from service for a demonstration.
