Homag Drillteq D200 Drill & Dowel Inserter. Year 2020
Specifications:
Horizontal Spindle(s) 3 spindles
Rotational Spindle Speed 7500 rpm maximum
Drill Shank Diameter 10 mm (0.39")
Total Length of Drill Bit 70 mm (2.75")
CNC Control PC-based with woodWop programming
Manually Adjustable Clamping Cylinders 4
Dowel Specifications:
Driver 1
Diameter 8 mm (0.31")
Projection fixed according to dowel length
Length 30 mm (1.25") or 35 mm (1.38")
Wooden Dowel Length Tolerance +/- 1 mm
Wooden Dowel Diameter Tolerance +/- 0.2 mm
Workpiece Specifications:
Supported Length (minimum) 20 mm (0.79")
Supported Length (maximum) 1250 mm (49.2")
Width (minimum) 50 mm (1.97")
Width (maximum) 800 mm (31.5")
Thickness (minimum) 10 mm (0.39")
Thickness (maximum) 60 mm (2.36")
Length for Active Center Stop (maximum) 620 mm (24.4")
Electrical:
Operating Voltage 208/480 Volts, 3Ø, 60 Hz
Dust Extraction:
Connection Size(s) 80 mm (3.15") diameter
Air Volume (324 cfm)
Compressed Air:
Connection Size(s) 1/2" Radius
Pressure Required 102 psi / 7 bar
Specifications:
Horizontal Spindle(s) 3 spindles
Rotational Spindle Speed 7500 rpm maximum
Drill Shank Diameter 10 mm (0.39")
Total Length of Drill Bit 70 mm (2.75")
CNC Control PC-based with woodWop programming
Manually Adjustable Clamping Cylinders 4
Dowel Specifications:
Driver 1
Diameter 8 mm (0.31")
Projection fixed according to dowel length
Length 30 mm (1.25") or 35 mm (1.38")
Wooden Dowel Length Tolerance +/- 1 mm
Wooden Dowel Diameter Tolerance +/- 0.2 mm
Workpiece Specifications:
Supported Length (minimum) 20 mm (0.79")
Supported Length (maximum) 1250 mm (49.2")
Width (minimum) 50 mm (1.97")
Width (maximum) 800 mm (31.5")
Thickness (minimum) 10 mm (0.39")
Thickness (maximum) 60 mm (2.36")
Length for Active Center Stop (maximum) 620 mm (24.4")
Electrical:
Operating Voltage 208/480 Volts, 3Ø, 60 Hz
Dust Extraction:
Connection Size(s) 80 mm (3.15") diameter
Air Volume (324 cfm)
Compressed Air:
Connection Size(s) 1/2" Radius
Pressure Required 102 psi / 7 bar
Specifications:
Horizontal Spindle(s) 3 spindles
Rotational Spindle Speed 7500 rpm maximum
Drill Shank Diameter 10 mm (0.39")
Total Length of Drill Bit 70 mm (2.75")
CNC Control PC-based with woodWop programming
Manually Adjustable Clamping Cylinders 4
Dowel Specifications:
Driver 1
Diameter 8 mm (0.31")
Projection fixed according to dowel length
Length 30 mm (1.25") or 35 mm (1.38")
Wooden Dowel Length Tolerance +/- 1 mm
Wooden Dowel Diameter Tolerance +/- 0.2 mm
Workpiece Specifications:
Supported Length (minimum) 20 mm (0.79")
Supported Length (maximum) 1250 mm (49.2")
Width (minimum) 50 mm (1.97")
Width (maximum) 800 mm (31.5")
Thickness (minimum) 10 mm (0.39")
Thickness (maximum) 60 mm (2.36")
Length for Active Center Stop (maximum) 620 mm (24.4")
Electrical:
Operating Voltage 208/480 Volts, 3Ø, 60 Hz
Dust Extraction:
Connection Size(s) 80 mm (3.15") diameter
Air Volume (324 cfm)
Compressed Air:
Connection Size(s) 1/2" Radius
Pressure Required 102 psi / 7 bar
