Homag S200 (1120 Auto) Pre-Mill 2018 (Used)

$0.00
Sold Out

https://www.youtube.com/shorts/qfvWCJ09SDA

*Extra Glue Pot in mint condition included with this machine

Technical Specifications:

·      016″ to 1/8″ maximum edgebanding thickness capacity (coil or strip)

·      Edgeband length: strips 9" minimum 5/16" min. to 2" max. panel thickness

·      Minimum panel length: 5-1/2"

·      Minimum panel width: 2-3/4"

·      Edgeband height: 5/16 to 1-5/8"

·      Electronic Easy Control with backlit LCD display

·      (2) 1 HP 12 000 RPM pre-milling units with diamond cutterheads

·      Automatic magazine for strip and coil feeding

·      Hot melt glue pot with 12-minute heat up time

·      Automatic temperature reduction feature (lowers the glue temperature if no panel is run over a 15-minute span)

·      Guillotine for cutting up to 3 mm PVC from the coil

·      Pressure station with (1) motorized pressure roller plus (2) additional idle pressure roller with digital setting system

·      Pre-mill with (2) 100mm heads

·      1/4 HP 12 000 RPM double motor end trim .33 HP

·      12 000 RPM top and bottom trim station equipped with two DFC combination straight/radius cutter heads and digital readouts (three different working positions: flush trim trimming with overhang and radius/bevel trimming)

·     

https://www.youtube.com/shorts/qfvWCJ09SDA

*Extra Glue Pot in mint condition included with this machine

Technical Specifications:

·      016″ to 1/8″ maximum edgebanding thickness capacity (coil or strip)

·      Edgeband length: strips 9" minimum 5/16" min. to 2" max. panel thickness

·      Minimum panel length: 5-1/2"

·      Minimum panel width: 2-3/4"

·      Edgeband height: 5/16 to 1-5/8"

·      Electronic Easy Control with backlit LCD display

·      (2) 1 HP 12 000 RPM pre-milling units with diamond cutterheads

·      Automatic magazine for strip and coil feeding

·      Hot melt glue pot with 12-minute heat up time

·      Automatic temperature reduction feature (lowers the glue temperature if no panel is run over a 15-minute span)

·      Guillotine for cutting up to 3 mm PVC from the coil

·      Pressure station with (1) motorized pressure roller plus (2) additional idle pressure roller with digital setting system

·      Pre-mill with (2) 100mm heads

·      1/4 HP 12 000 RPM double motor end trim .33 HP

·      12 000 RPM top and bottom trim station equipped with two DFC combination straight/radius cutter heads and digital readouts (three different working positions: flush trim trimming with overhang and radius/bevel trimming)

·     

·      Top and bottom profile quick change scraping unit

·      1-speed feed with speed of 26 FPM

·      Digital on top pressure beam for height indication

·      Adjustable infeed fence with digital readout Automatic height adjustment with top pressure beam for all work stations

·      Digitals on top and bottom trim station

·      Dust extraction: (4) 80 mm outlets and (1) 100 mm outlet 1600 CFM required

·      Compressed air connection: 6 bar (85 psi) Isolation transformer with variable infeed voltage for balancing all 3 phases of incoming power

·      Machine Weight: 1 650 lbs.

·      Machine dimensions: 12'1" long x 4' wide

·      Amperage required @ 230 volt: 30 amps