Homag S225-CHB 53" WBS 3 Heads Plus Cleaning (Used). Model: S225 CHB; SN: XX; Year: 2018. Replacement cost $145,000.00
SWT 200 series includes the following features: • Constant pass line (900 mm) • Protected storage space for spare sanding inserts • Automatic thickness setting system • Automatic Star Delta starting • Maintenance-free electrical main motor braking • Electronic abrasive belt oscillation with photo eyes • Pneumatic tensioning of abrasive belt • Safety switch-off of machine during faulty operation • Rubberized pressure rollers • Machine doors on belt-changing side have a window • Workpiece thickness: 3 mm to 200 mm (1/8" to 8") • Working width: 1350 mm (53") • Abrasive belt width: 1370 mm (54") • Abrasive belt length: 2150 mm (85")
A vacuum fan is mounted inside machine to assist in holding down workpieces: • Fan motor: 3.5 kW. Table can be split to increase vacuum on one half of the table for better hold down on small parts.
• 7" graphically supported color touch screen • LCD-TFT color screen with 800 x 600 resolution • Metric or decimal inch input (3 decimal places) • 125 program memory • Automatic machine control • One-button start (Star-Delta) • Sequential motor starting • Plain text error messaging at the operator terminal • Program backup via USB stick possible • Controls air or segmented pad options (only on models such feature).
LED Lights in Machine.
This sanding head features a combination sanding head with an automatic positioning contact roller with grit compensation as well as a segmented sanding pad for finish sanding. The profiled steel roller is ideal for calibration while the segmented pad provides performance versatility depending on the application:
• Manual head locking for fast abrasive belt changing • Automatic Star Delta starting • Adjustable sanding pressures • Maintenance-free electrical motor braking (no wearable parts) • Grit compensation and automatic positioning for calibration • Poly-V drive belt for maximum power and minimal vibration • Non-contact photo eyes for abrasive belt oscillation and runoff protection • Contact roller: 140 mm - Steel (5.5”) • Sanding element (pad): 80mm wide (0.52 felt) • Drive motor: 17.4 kW (23 hp) • Belt speed: 2-18 mps - Inverter (6.5-59 fps).
EPS Electronic Segmented Pad System (Head 1 & Head 2). Both heads are equipped with an electro-pneumatic controlled segmented pad. This feature is designed for precision sanding, with 25mm pad resolution and sanding segments, particularly well-suited for veneer or sealer sanding where a finer resolution is required.
Air Jet Blowers
All Heads are equipped with an electro-pneumatic controlled segmented pad. This feature is designed for precision sanding, with 25mm pad resolution and sanding segments, particularly well-suited for veneer or sealer sanding where a finer resolution is required.
Head 2: H-Head – Chevron Belt (Enhanced Finish) Sanding Unit This sanding head features a combination sanding head with an automatic positioning contact roller with grit compensation as well as a segmented sanding pad for finish sanding. The profiled rubber roller is ideal for light calibration or finish sanding while the segmented pad provides performance versatility depending on the application:
• Manual head locking for fast abrasive belt changing • Automatic Star Delta starting • Adjustable sanding pressures • Maintenance-free electrical motor braking (no wearable parts) • Poly-V drive belt for maximum power and minimal vibration • Non-contact photo eyes for abrasive belt oscillation and runoff protection • Sanding element (pad): 80mm wide (0.52 felt) • Drive motor: 17.4 kW (23 hp) • Belt speed: 2-16 mps - Inverter (6.5-59 fps)
Head 3: Brush Head with Brush Unit Quick Changer (Cassette).
• Texturing brush – Anderlon K80 Structuring Brush • Pneumatic positioning • Quick-change system • Brush diameter: 150 mm (6") • Drive motor: 6.4 kW (9 hp) • Dust outlet diameter: 140 mm (5.5") Additional brush units available as an option can be purchased at a later date.
Wire Brush Cassette
• Texturing brush – 0.38 mm Wire Brush • Mounted on change frame.
Service Cart for Brush (1x)
• Cart to slide brush cassettes out of machine onto – for easy brush change.
Cleaning Brush.
A cleaning brush cleans the part before the part exits the sander. • Drive Motor: .9kW (1.2 hp) • Diameter: 130 mm (5") • Brush Material: horsehair.
Voltage*: 460 Volts, 3 Phase, 60 HZ (24 V controls) Electrics: CE Full load amps: Approx. 100 FLA at 460 Volts Compressed air**: Approx. 50 cfm @ 90 psi Machine weight: ~8,500 lbs
Air Jet Blowers on all heads
An air jet belt blower, activated by the workpiece: • Application optimized for more effective cleaning results • Keeps the belt cooler, extending the life of the abrasive belt • No additional dust extraction is required for this feature • Minor compressed air consumption required • Adjustable in 5 intensities for compressed air savings
SWT 200 series includes the following features: • Constant pass line (900 mm) • Protected storage space for spare sanding inserts • Automatic thickness setting system • Automatic Star Delta starting • Maintenance-free electrical main motor braking • Electronic abrasive belt oscillation with photo eyes • Pneumatic tensioning of abrasive belt • Safety switch-off of machine during faulty operation • Rubberized pressure rollers • Machine doors on belt-changing side have a window • Workpiece thickness: 3 mm to 200 mm (1/8" to 8") • Working width: 1350 mm (53") • Abrasive belt width: 1370 mm (54") • Abrasive belt length: 2150 mm (85")
A vacuum fan is mounted inside machine to assist in holding down workpieces: • Fan motor: 3.5 kW. Table can be split to increase vacuum on one half of the table for better hold down on small parts.
• 7" graphically supported color touch screen • LCD-TFT color screen with 800 x 600 resolution • Metric or decimal inch input (3 decimal places) • 125 program memory • Automatic machine control • One-button start (Star-Delta) • Sequential motor starting • Plain text error messaging at the operator terminal • Program backup via USB stick possible • Controls air or segmented pad options (only on models such feature).
LED Lights in Machine.
This sanding head features a combination sanding head with an automatic positioning contact roller with grit compensation as well as a segmented sanding pad for finish sanding. The profiled steel roller is ideal for calibration while the segmented pad provides performance versatility depending on the application:
• Manual head locking for fast abrasive belt changing • Automatic Star Delta starting • Adjustable sanding pressures • Maintenance-free electrical motor braking (no wearable parts) • Grit compensation and automatic positioning for calibration • Poly-V drive belt for maximum power and minimal vibration • Non-contact photo eyes for abrasive belt oscillation and runoff protection • Contact roller: 140 mm - Steel (5.5”) • Sanding element (pad): 80mm wide (0.52 felt) • Drive motor: 17.4 kW (23 hp) • Belt speed: 2-18 mps - Inverter (6.5-59 fps).
EPS Electronic Segmented Pad System (Head 1 & Head 2). Both heads are equipped with an electro-pneumatic controlled segmented pad. This feature is designed for precision sanding, with 25mm pad resolution and sanding segments, particularly well-suited for veneer or sealer sanding where a finer resolution is required.
Air Jet Blowers
All Heads are equipped with an electro-pneumatic controlled segmented pad. This feature is designed for precision sanding, with 25mm pad resolution and sanding segments, particularly well-suited for veneer or sealer sanding where a finer resolution is required.
Head 2: H-Head – Chevron Belt (Enhanced Finish) Sanding Unit This sanding head features a combination sanding head with an automatic positioning contact roller with grit compensation as well as a segmented sanding pad for finish sanding. The profiled rubber roller is ideal for light calibration or finish sanding while the segmented pad provides performance versatility depending on the application:
• Manual head locking for fast abrasive belt changing • Automatic Star Delta starting • Adjustable sanding pressures • Maintenance-free electrical motor braking (no wearable parts) • Poly-V drive belt for maximum power and minimal vibration • Non-contact photo eyes for abrasive belt oscillation and runoff protection • Sanding element (pad): 80mm wide (0.52 felt) • Drive motor: 17.4 kW (23 hp) • Belt speed: 2-16 mps - Inverter (6.5-59 fps)
Head 3: Brush Head with Brush Unit Quick Changer (Cassette).
• Texturing brush – Anderlon K80 Structuring Brush • Pneumatic positioning • Quick-change system • Brush diameter: 150 mm (6") • Drive motor: 6.4 kW (9 hp) • Dust outlet diameter: 140 mm (5.5") Additional brush units available as an option can be purchased at a later date.
Wire Brush Cassette
• Texturing brush – 0.38 mm Wire Brush • Mounted on change frame.
Service Cart for Brush (1x)
• Cart to slide brush cassettes out of machine onto – for easy brush change.
Cleaning Brush.
A cleaning brush cleans the part before the part exits the sander. • Drive Motor: .9kW (1.2 hp) • Diameter: 130 mm (5") • Brush Material: horsehair.
Voltage*: 460 Volts, 3 Phase, 60 HZ (24 V controls) Electrics: CE Full load amps: Approx. 100 FLA at 460 Volts Compressed air**: Approx. 50 cfm @ 90 psi Machine weight: ~8,500 lbs
Air Jet Blowers on all heads
An air jet belt blower, activated by the workpiece: • Application optimized for more effective cleaning results • Keeps the belt cooler, extending the life of the abrasive belt • No additional dust extraction is required for this feature • Minor compressed air consumption required • Adjustable in 5 intensities for compressed air savings
SWT 200 series includes the following features: • Constant pass line (900 mm) • Protected storage space for spare sanding inserts • Automatic thickness setting system • Automatic Star Delta starting • Maintenance-free electrical main motor braking • Electronic abrasive belt oscillation with photo eyes • Pneumatic tensioning of abrasive belt • Safety switch-off of machine during faulty operation • Rubberized pressure rollers • Machine doors on belt-changing side have a window • Workpiece thickness: 3 mm to 200 mm (1/8" to 8") • Working width: 1350 mm (53") • Abrasive belt width: 1370 mm (54") • Abrasive belt length: 2150 mm (85")
A vacuum fan is mounted inside machine to assist in holding down workpieces: • Fan motor: 3.5 kW. Table can be split to increase vacuum on one half of the table for better hold down on small parts.
• 7" graphically supported color touch screen • LCD-TFT color screen with 800 x 600 resolution • Metric or decimal inch input (3 decimal places) • 125 program memory • Automatic machine control • One-button start (Star-Delta) • Sequential motor starting • Plain text error messaging at the operator terminal • Program backup via USB stick possible • Controls air or segmented pad options (only on models such feature).
LED Lights in Machine.
This sanding head features a combination sanding head with an automatic positioning contact roller with grit compensation as well as a segmented sanding pad for finish sanding. The profiled steel roller is ideal for calibration while the segmented pad provides performance versatility depending on the application:
• Manual head locking for fast abrasive belt changing • Automatic Star Delta starting • Adjustable sanding pressures • Maintenance-free electrical motor braking (no wearable parts) • Grit compensation and automatic positioning for calibration • Poly-V drive belt for maximum power and minimal vibration • Non-contact photo eyes for abrasive belt oscillation and runoff protection • Contact roller: 140 mm - Steel (5.5”) • Sanding element (pad): 80mm wide (0.52 felt) • Drive motor: 17.4 kW (23 hp) • Belt speed: 2-18 mps - Inverter (6.5-59 fps).
EPS Electronic Segmented Pad System (Head 1 & Head 2). Both heads are equipped with an electro-pneumatic controlled segmented pad. This feature is designed for precision sanding, with 25mm pad resolution and sanding segments, particularly well-suited for veneer or sealer sanding where a finer resolution is required.
Air Jet Blowers
All Heads are equipped with an electro-pneumatic controlled segmented pad. This feature is designed for precision sanding, with 25mm pad resolution and sanding segments, particularly well-suited for veneer or sealer sanding where a finer resolution is required.
Head 2: H-Head – Chevron Belt (Enhanced Finish) Sanding Unit This sanding head features a combination sanding head with an automatic positioning contact roller with grit compensation as well as a segmented sanding pad for finish sanding. The profiled rubber roller is ideal for light calibration or finish sanding while the segmented pad provides performance versatility depending on the application:
• Manual head locking for fast abrasive belt changing • Automatic Star Delta starting • Adjustable sanding pressures • Maintenance-free electrical motor braking (no wearable parts) • Poly-V drive belt for maximum power and minimal vibration • Non-contact photo eyes for abrasive belt oscillation and runoff protection • Sanding element (pad): 80mm wide (0.52 felt) • Drive motor: 17.4 kW (23 hp) • Belt speed: 2-16 mps - Inverter (6.5-59 fps)
Head 3: Brush Head with Brush Unit Quick Changer (Cassette).
• Texturing brush – Anderlon K80 Structuring Brush • Pneumatic positioning • Quick-change system • Brush diameter: 150 mm (6") • Drive motor: 6.4 kW (9 hp) • Dust outlet diameter: 140 mm (5.5") Additional brush units available as an option can be purchased at a later date.
Wire Brush Cassette
• Texturing brush – 0.38 mm Wire Brush • Mounted on change frame.
Service Cart for Brush (1x)
• Cart to slide brush cassettes out of machine onto – for easy brush change.
Cleaning Brush.
A cleaning brush cleans the part before the part exits the sander. • Drive Motor: .9kW (1.2 hp) • Diameter: 130 mm (5") • Brush Material: horsehair.
Voltage*: 460 Volts, 3 Phase, 60 HZ (24 V controls) Electrics: CE Full load amps: Approx. 100 FLA at 460 Volts Compressed air**: Approx. 50 cfm @ 90 psi Machine weight: ~8,500 lbs
Air Jet Blowers on all heads
An air jet belt blower, activated by the workpiece: • Application optimized for more effective cleaning results • Keeps the belt cooler, extending the life of the abrasive belt • No additional dust extraction is required for this feature • Minor compressed air consumption required • Adjustable in 5 intensities for compressed air savings
