Weeke BP 120 Machining Center (USED, 2000)
Weeke BP 120 Machining Center (USED, 2000)
Model: BP 120 Machining Center
SN: 0-250-13-0614
Year: 2000
480V; 60Hz; 3~
Stock#: N/A
Product Details
Work area cap.: 2,800 mm (110") Length, 1,000 mm (39-3/8") width; boring unit with (20) independent vertical spindles, (10) in X-axis, (10) in Y-axis with (1) shared spindle, (1) special separate spindle for up to 35 mm dia. drills; (4) horizontal spindles with (1 + 1) in X-axis for edge boring in the left & right hand panel edges and (1 + 1) spindle for edge boring in the rear panel edge.
Equipped with: (1) 10 HP High speed router with "on board - ride along" 8-Tool Tool Changer ("HSK63" tool holders w/tapered shank), and (1) 7 HP Auxiliary Router w/Hydro-grip spindle; powered by 11 KVA frequency inverter w/programmable 9,000 - 18,000 RPM constant power spindle speed; 2 HP grooving saw with 100 mm dia. blade for X-axis operation.
(8) Moveable support rails w/side mounted raise & lower panel feeding rail, (2) square matrix vacuum cups ea., (8) pneumatic backstops, (2) movable pneumatic side stops and the dual central zero stop create (2) working zones and allow for (4) workpieces at a time. The head travels on THK linear motion guides on all axes, feed speed X-axis 263 FPM, Y-axis 196 FPM and Z-axis 64 FPM.
WEEKE "2000-IPC" Windows based Pentium controller for (3) axes; linear, circular & helical interpolation; NUM programmable logic control operating system, 17" color graphic monitor, industrial keyboard for data entry, 3-1/2" floppy disk drive, 1.0 GB hard drive, 32-bit processors, EtherNET interface for LAN connection to office PC, RS-232 serial interface for simple PC connection; all mounted in separate free-standing control cabinet, compatible & integrated with HOLZMA "Cut-Rite Plus" software.
Complete with: 100 cbm/Hr Vacuum pump, man height safety enclosure around rear & sides of machine, 2-zone front & back triple photo cell safety barrier arms (will stop machine if operator enters work area), transformer which will allow connection for any 3-phase voltages.
Weeke BP 120 Machining Center (USED, 2000)
Model: BP 120 Machining Center
SN: 0-250-13-0614
Year: 2000
480V; 60Hz; 3~
Stock#: N/A
Product Details
Work area cap.: 2,800 mm (110") Length, 1,000 mm (39-3/8") width; boring unit with (20) independent vertical spindles, (10) in X-axis, (10) in Y-axis with (1) shared spindle, (1) special separate spindle for up to 35 mm dia. drills; (4) horizontal spindles with (1 + 1) in X-axis for edge boring in the left & right hand panel edges and (1 + 1) spindle for edge boring in the rear panel edge.
Equipped with: (1) 10 HP High speed router with "on board - ride along" 8-Tool Tool Changer ("HSK63" tool holders w/tapered shank), and (1) 7 HP Auxiliary Router w/Hydro-grip spindle; powered by 11 KVA frequency inverter w/programmable 9,000 - 18,000 RPM constant power spindle speed; 2 HP grooving saw with 100 mm dia. blade for X-axis operation.
(8) Moveable support rails w/side mounted raise & lower panel feeding rail, (2) square matrix vacuum cups ea., (8) pneumatic backstops, (2) movable pneumatic side stops and the dual central zero stop create (2) working zones and allow for (4) workpieces at a time. The head travels on THK linear motion guides on all axes, feed speed X-axis 263 FPM, Y-axis 196 FPM and Z-axis 64 FPM.
WEEKE "2000-IPC" Windows based Pentium controller for (3) axes; linear, circular & helical interpolation; NUM programmable logic control operating system, 17" color graphic monitor, industrial keyboard for data entry, 3-1/2" floppy disk drive, 1.0 GB hard drive, 32-bit processors, EtherNET interface for LAN connection to office PC, RS-232 serial interface for simple PC connection; all mounted in separate free-standing control cabinet, compatible & integrated with HOLZMA "Cut-Rite Plus" software.
Complete with: 100 cbm/Hr Vacuum pump, man height safety enclosure around rear & sides of machine, 2-zone front & back triple photo cell safety barrier arms (will stop machine if operator enters work area), transformer which will allow connection for any 3-phase voltages.
Weeke BP 120 Machining Center (USED, 2000)
Model: BP 120 Machining Center
SN: 0-250-13-0614
Year: 2000
480V; 60Hz; 3~
Stock#: N/A
Product Details
Work area cap.: 2,800 mm (110") Length, 1,000 mm (39-3/8") width; boring unit with (20) independent vertical spindles, (10) in X-axis, (10) in Y-axis with (1) shared spindle, (1) special separate spindle for up to 35 mm dia. drills; (4) horizontal spindles with (1 + 1) in X-axis for edge boring in the left & right hand panel edges and (1 + 1) spindle for edge boring in the rear panel edge.
Equipped with: (1) 10 HP High speed router with "on board - ride along" 8-Tool Tool Changer ("HSK63" tool holders w/tapered shank), and (1) 7 HP Auxiliary Router w/Hydro-grip spindle; powered by 11 KVA frequency inverter w/programmable 9,000 - 18,000 RPM constant power spindle speed; 2 HP grooving saw with 100 mm dia. blade for X-axis operation.
(8) Moveable support rails w/side mounted raise & lower panel feeding rail, (2) square matrix vacuum cups ea., (8) pneumatic backstops, (2) movable pneumatic side stops and the dual central zero stop create (2) working zones and allow for (4) workpieces at a time. The head travels on THK linear motion guides on all axes, feed speed X-axis 263 FPM, Y-axis 196 FPM and Z-axis 64 FPM.
WEEKE "2000-IPC" Windows based Pentium controller for (3) axes; linear, circular & helical interpolation; NUM programmable logic control operating system, 17" color graphic monitor, industrial keyboard for data entry, 3-1/2" floppy disk drive, 1.0 GB hard drive, 32-bit processors, EtherNET interface for LAN connection to office PC, RS-232 serial interface for simple PC connection; all mounted in separate free-standing control cabinet, compatible & integrated with HOLZMA "Cut-Rite Plus" software.
Complete with: 100 cbm/Hr Vacuum pump, man height safety enclosure around rear & sides of machine, 2-zone front & back triple photo cell safety barrier arms (will stop machine if operator enters work area), transformer which will allow connection for any 3-phase voltages.
*This machine is offered in good running condition as taken from service and is subject to prior sale. Specifications are approximate and to the best of our knowledge. Verification is available upon request.
